Evaporation Glassware - Traditional for S-EVAP-RB


Organomation Glassware Menu: Introduction - About Our Glassware Evaporation Glassware: Kuderna-Danish for S-EVAP-KD / Traditional for S-EVAP-RB Extraction Glassware: Soxhlet for ROT-X-TRACT-S / Evaporative Soxhlet for ROT-X-TRACT-S Liquid/Liquid for ROT-X-TRACT-L / Corning Accelerated One-Step® for ROT-X-TRACT-LC Glassware For All Units: Accessories & Hardware Return to Home Page

Evaporation Glassware - Traditional for S-EVAP-RB

Concentrator Tube - Graduated	Catalog No.
Concentrator 10ml standard 19/22	GP2241
Concentrator 10ml insulated19/22	GP2243
Concentrator 15ml standard 19/22	GP2242

Condenser - Hopkins Extended 24/40	Catalog No.
Hopkins Condenser Extended, 24/40 STJ	GP2212
Hopkins Tube Condenser Extended, (Central Collect)	GP2212-C

Top of Page

Flask - Flat Bottom	Catalog No.
Flat Bottom Flask 125 ML, 24/40 STJ	GP3215
Flat Bottom Flask 250 ML, 24/40 STJ	GP3216
Flat Bottom Flask 500 ML, 24/40 STJ	GP2214
Flat Bottom Flask 1000 ML, 24/40 STJ	GP2213

Flask - Kuderna-Danish	Catalog No.
KD Flask 250 ML, 19/22 x 24/40 STJ	GP2215
KDFlask500ML, 19/22 x 24/40 STJ	GP2216
KD Flask 1000 ML, 19/22 x 24/40 STJ	GP2217

Hopkins Adapter	Catalog No.
Hopkins Tube Adapter 24/40 x 1/4"OD Tube (to adapt Hopkins condenser to Central Collect)	GP3221

Glass Set - Single Position Complete	Catalog No.
Flat Bottom Flask 125ml, Hopkins Extended Condenser, Flat Bottom Flask 250ml	GS2161
Flat Bottom Flask 250ml, Hopkins Extended Condenser, Flat Bottom Flask 250ml	GS2162
Flat Bottom Flask 500ml, Hopkins Extended Condenser, Flat Bottom Flask 500ml	GS2163
Substitute Hopkins Tube Extended Condenser for use with Central Solvent Collection Vessel	-C
Substitute KD flask and insulated concentrator tube for flat bottom flask	-K

Central Solvent Collection Vessel	Catalog No.
Central Solvent Collection Vessel 2.5L 5 port, Teflon tubing and fittings. For use with 125 ML and 250 ML flasks.	GS2156-C5
Central Solvent Collection Vessel 2.5L 8 port, Teflon tubing and fittings. For use with 125 ML and 250 ML flasks.	GS2156-C8
Central Solvent Collection Vessel 4.0L 5 port, Teflon tubing and fittings. For use with 500 ML flasks.	GS2158-C5
Central Solvent Collection Vessel 4.0L 8 port, Teflon tubing and fittings. For use with 500 ML flasks.	GS2158-C8

Application Notes:
The evaporative glassware shown on this page are for applications where a Snyder Column is not necessary. Use flat bottom flask for evaporations to dryness and KD for 1 ML endpoint. Due to hot saturated vapor presence in the glassware, final evaporation to desired endpoint will be required after glassware is removed from the heated bath. An Organomation N-EVAP nitrogen evaporator is ideal for this. For dryness applications, the flask may separated from the condenser and dried on the bath.

This glassware may be used with Methylene Chloride, Freon, Acetone, Hexan, and similar solvents. This glassware may be used with oil & grease procedures, EPA method 1664, and other procedures where evaporation to a given endpoint and solvent recovery is desired.

The extended Hopkins Tube condenser is 50mm (2 inches) longer than the regular extended Hopkins condenser in order to accommodate the Central Solvent Collection Vessel.

Top of Page

Site Navigation Menu:

Nitrogen Evaporators: Introduction / N-EVAP / MULTIVAP Solvent Evaporators: Introduction / S-EVAP-RB / S-EVAP-KD
Solvent Extractors: ROT-X-TRACT-S / ROT-X-TRACT-L / ROT-X-TRACT-LC for Corning Accelerated One-Step® Glassware
Organomation Scientific Glassware / Organomation Heating Devices / Organomation Instrument Warranty and Service Information

Return to Home Page

For further information, contact us at:

266 River Road West, Berlin, MA 01503-1699 USA
Phone: (888) 838-7300 Fax: (978) 838-2786
Email: organomation@worldnet.att.net