|
|
|
|
Nitrogen
Evaporators Menu: |
|
| Instrument Name | N-EVAP | N-EVAP | N-EVAP | ||
| Number of Sample Positions | 6 | 12 | 24 | 34 | 45 |
| Instrument Catalog Number ( Order Online* ) |
11106 | 11155 | 11250 | 11634 | 11645 |
| Overall
Dimensions w x d x h |
13 x 11 x 31 in 33 x 28 x 79 cm |
16 x 15
x 33 in 41 x 38 x 84 cm |
24 x 19 x 34 in 61 x 48 x 86 cm |
||
| Sample
Holder and Gas Manifold Layout |
Circular Single Ring | Circular Single Ring | Circular Single Ring | Circular Dual Rings | |
| Test
Tubes Accommodated Diameter mm |
10-56 mm | 5-29 mm | 10-29 mm | 10-29 mm | Outer Circle 10-19 mm Inner Circle 10-30 mm |
| Side
Mount Function Control Box with Timer for Nitrogen & Heat |
N/A | Optional | Standard | ||
| Gas
Flow Meter Liters/Minute |
0-5 lpm | 0-10 lpm | 0-20 lpm | ||
| Gas
Pressure Regulator Range |
Optional Accessory 0-30 psig |
Optional 0-30 psig |
Standard 0-30 psig |
||
| Stainless Steel Needles Length & Gauge |
4in x 14ga 10cm x 14ga |
4in x 19ga 10cm x 19ga |
4in x
19ga 10cm x 19ga |
4in x 19ga 10cm x 19ga |
|
| Hoist
Assembly (water bath models only) |
Coil Spring | Dual Band Springs | Dual Band Springs | ||
| Rotating Gas Supply Tube | N/A | Standard | Standard | ||
* When ordering options listed below, please add the appropriate suffix to the catalog number when ordering.
| Instrument Standard Features | Instrument Options | Gas Injector Options |
| Instrument rotates. All samples accessibly from front. Gas flow meter & valve measures & controls flow rate. Gas needle valve at each sample position. Certified phthalate free tubing. Laboratory grade materials stand up to organic solvents. |
Acid resistant coating (-RT) or (-RP) Dry bath replaces water bath (-DA) Instrument only, delete heating unit (-0) |
FEP
coated needles (-T) 6 inch long needles (-6) Pasteur pipette fittings (-P) |
| Gas
Injector Accessory Pasteur pipette adapters # NA0636 |
| Model
Number ( Order Online* ) |
5085 | 8125 | 14165-C |
| Inside
Dimensions Diameter & Depth |
8.5 x 4.5 in 21.6 x 11.4 cm |
12.0 x
4.5 in 30.5 x 11.4 cm |
16.0 x 4.5 in 40.6 x 11.4 cm |
| Outside
Dimensions w x d x h |
13 x 12 x 7 in 33 x 30 x 18 cm |
18 x 16
x 7 in 46 x 41 x 18 cm |
24 x 19 x 15 in 61 x 48 x 15 cm |
| Heaters Total Watts | 500 W | 800 W | 1400 W |
| Temperature Controller Type and Accuracy |
Mechanical Thermostat ± 2 C |
Mechanical Thermostat ± 2 C |
Digital Electronic with LED Display ± .5 C |
* When ordering options
listed below, please add the
appropriate suffix to the catalog number when
ordering.
| Heating Device Standard Features | Heating Device Options |
| Stainless steel construction. Water bath temperature range 30 - 90 C. Dry bath temperature range 30 - 90 C. Stepped bath rim helps contain water or dry media. High temperature protection switch with automatic reset. |
Intrinsically safe Z purged bath (-Z). Intrinsically safe active type Z purged bath (-ZX). Acid resistant coating (-R) Digital electronic temperature control (-E on model 5085, 8125) |
| Heating
Device Accessory GFCI electrical adapter, in-line #BP0409 (110 volt only). |
|
Site Navigation Menu: Nitrogen Evaporators:
Introduction / N-EVAP / MULTIVAP Solvent Evaporators:
Introduction / S-EVAP-RB / S-EVAP-KD |
|
For
further information, contact us at: |
